Date: 1/10/2008

Sager New Model NP5793

Starting Monday 1/14/2008:

Sager NP5792 / NP5793

All nVIDIA GeForce 8700M GT w/512MB orders will be shipped with Sager current model NP5792 (Clevo M570RU)

All nVIDIA GeForce 8800M GTX w/512MB orders will be shipped with Sager new model NP5793 (Clevo M570RU-U)

Main differences of NP5793 (Clevo M570RU-U) is that the bottom case and CPU heat-sink has been revised to support the Intel mobile Extreme edition processors, giving user control to additional 1x or 2x over the default CPU bus multiplier in the system BIOS.
IE:

X7900/X9000 standard clock 2.8GHz (800FSB / 4 = 200 x 14 = 2800)
Over 1x would = to 3.0GHz (800FSB / 4 = 200 x 15 = 3000)
Over 2x would = to 3.2GHz (800FSB / 4 = 200 x 16 = 3200)

Since the pricing of Intel Mobile Extreme X7900 and X9000 are at the same pricing point, we will not be offering the X7900 processor; we will start accepting X9000 pre-orders once we are provided a firm ETA when the processor will be available by the Intel distributors.

The BIOS will be shared between the NP5792 / NP5793 , however Sager is still deciding if it will auto block the Over clocking functions when flashed into the older revision motherboards.

Sager NP5793 (Clevo M570RU-U) has a newer revision motherboard V5.x, improvements were made to support extreme with over clocking.

Sager will only recognize support of the extreme edition processors on NP5793 (Clevo M570RU-U) with motherboard V5.0 and above.

Installing the X series CPU in any older motherboards will not be supported by Sager, regardless of the CPU heat-sink and bottom cover.

Sager NP5792 (Clevo M570RU) with motherboard revision of V4.x, these motherboards are approved to support T8100 / T8300 / T9300 / T9500. Sager & Clevo have not approved the X7900 / X9000 extreme processors on the V4.x revision of motherboards regardless of the thermal solution.

Pics are below